|
Isotherm Electric⁄Engine Hot Water Heaters
SS Marine Water Heaters In Two Styles - Basic and New Slim Cylindrical Models
Isotemp Basic and Slim water heaters give you the following advantages:
Features:
The design allows both horizontal and vertical mounting options
Isotemp Slim is for narrow places, for example, under a berth in a sailing yacht
Highest quality in material (AISI 316) and welding, 2-year full warranty and 5-year limited warranty on the tank
Expanded polyurethane foam insulation, for lowest temperature loss
Immersion heater element, specially designed to heat the water in the bottom of the tank as well as the top
The element (230 or 115 volt ⁄750 watt), is made of copper covered by nickel for long life
Engine water heat exchanger coil is extra long for faster heating, especially good for sailing yachts
Double overheat safety thermostat with mixing valve
Service thermostat set to keep the water above 70°C, to prevent the risk of bacterial growth
Simple winter drain
Stable mounting feet in stainless steel adjustable 360°, for easier bulkhead installation
Water connections outside thread is 1/2"
115 volts AC, 6.25 amps, 750 watts
Includes power cable with EU-plug
| Dia. |
Gallons |
Length |
Type |
| 12" |
4.0 |
21" |
Slim 15 |
| 12" |
5.3 |
26" |
Slim 20 |
| 12" |
6.5 |
30-3⁄4" |
Slim 25 |
| 15-1⁄2" |
6.4 |
19-3⁄8" |
Basic 24 |
| 15-1⁄2" |
8.0 |
21-1⁄2" |
Basic 30 |
| 15-1⁄2" |
11.0 |
26" |
Basic 40 |
| 15-1⁄2" |
11.0 |
26" |
Basic 40 Double Coil |
| 15-1⁄2" |
13.0 |
30-3⁄4 |
Basic 50 |
| 15-1⁄2" |
20.0 |
42-1⁄8" |
Basic 75 |
|
