Easy On Bottom Coating
Why paint when you can wax?
If your boating is in low fouling fresh water or cold saltwater, consider new waxing technology instead of anti-fouling bottom paint. An easy-to-use, nontoxic, soft-wax coating for full-season protection. One bottle will cover a 24' boat. Clear. Pint.
- Recommended Usage: Fresh or intermittent salt water use; lasts one full season
- Biocide: None. Clear, nontoxic alternative to bottom paints
- Number of Coats Recommended: One
- Coverage: One pint covers 24' hull
- Drying Time: Dries in minutes, overnight curing before launch
- Maximum Out of Water Time: Indefinite
An easy to use, high tech, clear, non-toxic barrier system bottom coating for use as an environmental alternative to antifouling bottom paint. This new technology provides full season fresh water protection and intermittent salt water protection. Easy-On provides easy clean-off of algae, zebra mussels and other marine organisms from fiberglass, aluminum and painted hulls, outdrives, trim tabs, transducers, fenders and inflatables.
Features:
Wipes on clear
Maintains original boat color
Foul-release makes cleaning easy
Can be applied over old antifouling coatings
One 15 fl. oz. bottle will coat a 24 ft. boat; 1 coat recommended
Easy-On Bottom Coating FAQ-
Is Easy On Bottom Coating an antifouling system?
No, Easy On Bottom Coating is not an antifouling system. It is a water based, clear, non toxic foul release barrier system used as an alternative to antifouling paints.
How long will Easy On Bottom Coating be effective?
This depends largely on your local water conditions but generally Easy On Bottom Coating will provide full season fresh water and intermittent salt water protection. It is important to note that this is a cleanable barrier system and throughout the season if minor fuzz or marine attachment occur, we recommend sponge or deck-brush cleaning of the coated surface to maintain performance. Some harbors, due to local water conditions, will require more or less regular cleaning.
Do I have to remove my old antifouling paint prior to using Easy On Bottom Coating?
No, you can use Easy On overtop the old antifouling paint.
Do I need to buff or polish Easy On Bottom Coating?
No, Easy On Bottom Coating dries in minutes to a soft moveable, clear film that is not buffed or polished.
Does Easy On have to cure?
Yes, allow an overnight cure before launching boat. Easy On must be allowed to cure for at least 12 hours.
Can Easy On be applied at any temperature?
Easy On Bottom Coating can be applied at any ambient temperature above freezing, but it is easier to apply at warm temperatures.
What if I applied the product too thick?
If product is applied too thick, use an abrasive pad and suitable rubbing compound to remove excess. The next season, clean the boat bottom well and reapply 1 thin coat of Easy On.
Should I apply Easy On if rain is pending?
Easy On must be allowed to cure for at least 12 hours. Do not apply if there is the possibility of rain as the moisture may counteract the curing process.
